Helmets

コレクション:

ヘルメット

ロードバイク、マウンテンバイク、子供用自転車のヘルメットを取り揃えております。掲載されているヘルメットはすべて認定安全基準を満たしており、通気性に優れたシェルと調整可能なフィット感を備えています。
  • Free shipping On AU orders over $100
  • Australian store Local support, fast dispatch
  • 30 day returns Hassle free returns
  • Secure checkout 256-bit SSL encryption

サイクリングヘルメット:認証、フィット感、通気性

ヘルメットは、オーストラリア国内での使用が認証されており、頭部に正しく装着され、衝突時にしっかりと固定されて初めてその役割を果たします。重量、空力性能、通気口の数といった他の要素は、これら3つの点に比べれば二次的なものです。

オーストラリアの規格

オーストラリアのすべての州および準州では、承認された自転車用ヘルメットの着用が義務付けられています。適用される規格はAS/NZS 2063であり、適合するヘルメットにはシェルの内側にステッカーまたは刻印が施されています。海外で販売されているヘルメットは、欧州または米国の規格のみに準拠している可能性があるため、海外の小売業者から購入したものについては、そのマークを確認してください。このページに掲載されているすべてのヘルメットは、オーストラリア市場向けに取り扱っている製品です。

MIPSと回転衝撃保護

ほとんどの衝突事故では斜め方向からの衝撃が加わり、直線的な衝撃だけでなく、頭部にねじれの力が加わります。MIPSや類似のシステムは、ライナーと頭部の間に低摩擦層を設けることで、衝突時にシェルがその回転に合わせて数ミリメートル動くように設計されています。これによりコストとわずかな重量が増加しますが、交通量の多い場所やテクニカルな地形を走行するライダーにとっては、導入する価値が非常に高いと言えます。

フィット感こそが購入の決め手

眉の約1センチ上を測り、各製品ページのサイズチャートと照らし合わせてください。ヘルメットは、眉の2本指分上に水平になるように装着し、サイドストラップは耳の下でV字型になるようにします。あご紐は、口を大きく開けたときにヘルメットが下に引っ張られる程度の締め付けが必要です。クレードルをきつく締めないと安定しない場合は、シェルが頭のサイズや形状に合っていません。頭の形はサイズと同様に個人差があるため、購入前に試着することが重要です。

通気性と空力性能

通気口の数はそれだけで判断の目安にはなりません。重要なのは、空気がヘルメット内の溝を通って後ろへ抜けるかどうかです。オーストラリアの夏のライドでは、レースに参加する場合を除き、空力性能よりも通気性を優先しましょう。エアロロードヘルメットは通気口を塞いで表面を滑らかにしますが、それによって得られるタイムの短縮効果は、実際にはわずかなものです。

交換時期

ライナーは一度の衝撃で潰れるように設計されているため、見た目に損傷がなくても、衝撃を受けたヘルメットは交換してください。多くのメーカーは、定期的に使用している場合、3〜5年ごとの交換を推奨しています。

当店ではKask、MET、POC、Abus、Lazer、Foxの各ブランドを取り扱っており、ロード用およびマウンテンバイク用のモデルをご用意しています。ヘルメットには別途送料がかかります。アデレードのショールームでは、製品の形状を実際に頭に合わせてお確かめいただけるよう、これらのラインナップのほとんどを展示しています。

ヘルメットに関する質問

Does a bike helmet need to be certified in Australia?

Yes. Wearing an approved bicycle helmet is mandatory in every Australian state and territory, and the standard that applies is AS/NZS 2063. A compliant helmet carries a sticker or moulded mark inside the shell. Helmets bought from offshore retailers may be certified to European or American standards alone, so check the marking.

How should a bike helmet fit?

Measure your head about a centimetre above your eyebrows and match it to the brand chart. The helmet should sit level with roughly two finger widths above your eyebrows, the side straps should form a V just under your ear, and opening your mouth wide should pull the helmet down slightly. If it only feels secure once the rear cradle is cranked tight, the shell is the wrong size or shape for your head.

Is MIPS worth paying for?

Most crashes involve an angled impact, which sends a twisting force through the head as well as a straight one. MIPS and similar systems add a low friction layer that lets the shell move a few millimetres against that rotation. It costs more and adds a little weight. The case is strongest for riders in traffic and on technical terrain.

When should I replace my helmet?

After any impact, even when the shell looks intact, because the liner is designed to crush once and does not recover. Beyond that, most manufacturers advise replacement every three to five years of regular use as the liner and straps degrade.

Can I try this on before buying?

Yes. Our Adelaide showroom at 122 Pirie Street carries most of our range and staff can fit you properly. Sizing across Italian and Australian brands varies enough that this is worth the trip if you are new to a brand.

How long does delivery take?

Orders start processing within one working day of your payment clearing. Australian orders of $100 or more ship free, and worldwide orders of $190 or more ship free. Express Post within Australia is $19.95, and orders placed before 4pm ACST go out the same day and typically arrive in 1 to 3 days. Helmets and shoes carry a shipping surcharge and are excluded from free shipping.

Featured brands